25CrMo4 13CrMo44 41Cr4 34Cr4 46MnSi4 37MnSi5 30Mn5 42CrMo4 20CrMo4 ECN35 Alloy Stuctural Steel
- Grade:
Click To Email Seller
Share this ad
Specification, Chemical & Mechanical Performance
| Grade | Steel grades | Property | Application | Picture |
| 25CrMo4 | Mat.No. 1.7218, DIN 25CrMo4, AISI 4130 | Structural alloyed carbon steel. | Statically and dynamically stressed components for vehicles, engines and machines - axles, turbine components, chains, forgings, etc. |  |
| 13CrMo44 | Steel 13CRMO44 (Mat.No. 1.7335, DIN 13CrMo44, AISI A182 Grade F11) | Alloy special structural steels. Cr-Mo-steels with > 0.35% Mo. | High-temperature structural steel: Collectors, water boiler and superheater tubes (530oC). | |
| 41Cr4 | Steel VC140 (Mat.No. 1.7035, DIN 41Cr4, AISI 5140) | Structural alloyed carbon steel. | Low and moderately stressed parts for vehicles, engines and machines where hard, wear resisting surface is needed. Hardness as surface hardened about 54 HRC. |  |
| 34Cr4 | Steel VC130 (Mat.No. 1.7033, DIN 34Cr4, AISI 5132) | Structural steel. | Screws, dynamically stressed machine parts, etc. | |
| 46MnSi4 | Steel 46MNSI4 (Mat.No. 1.5121, DIN 46MnSi4, AISI 5045) | Special structural steel. | Low and moderately stressed components for automobile industry and mechanical engineering - shafts, connecting rods, crankshafts. | |
| 37MnSi5 | Steel VMS135 (Mat.No. 1.5122, DIN 37MnSi5) | Structural steel. Parts of high core stability and good toughness like gear parts etc. | Low and moderately stressed components for vehicles, machines and engines. | |
| 30Mn5 | Steel VM125 (Mat.No. 1.1165, DIN 30Mn5) | Non alloy special sructural steels: Structural steels with average C < 0,50%. | Quenched and tempered steel castings or general engineering uses. | |
| 42CrMo4 | 1.7225, DIN 42CrMo4, AISI 4142 | This is one of the chromium, molybdenum, manganese low alloy steels noted for toughness, good torsio | Statically and dynamically stressed components for vehicles, engines and machines. For parts of larger cross-sections, crankshafts, gears. | |
| 20CrMo4 | 20CrMo SCM420 4118 20CrMo5 1.7264 20XM CDS12 | Alloyed carbon steel | Higher stressed components - gears, shafts, crankshafts, connecting rods, cam shafts, etc. | |
| ECN35 | ECN35 Mat.No. 1.5752 DIN: 14NiCr14 AISI: 3310,3415 | Alloyed carbon steel | Components with large cross section requiring high toughness and core strength, e.g., gears, gear shafts, crankshafts. | |
| 38Cr2 | 38CR2 1.7003, DIN 38Cr2, AISI 5140 | Alloy special structural steel. | Cold forging steel grade used for stressed parts for machines, vehicles, quenched and tempered screws etc. |  |
| 20MoCr4 | 1.7321, DIN 20MoCr4, AISI 8620 | One of the most popular and widely used carborizing steels available. 20MoCr4 is a hardenable chromi | Gears, shafts and other applications where a hard carborized case and a tough core are desired. | |
| 20Cr4 | 1.7027, DIN 20Cr4, AISI 5120 | Alloyed carbon steel. | For case-hardening. Lower duty parts: exles, fitting keys, etc | |
| X120Mn12 | 12MN 901 1.3401 X120Mn12 - A128 grade A | Austenitic Mn-steel. The well-known Hadfield steel still has broad applications in the mineral proce | Components for dredgers and crushers, conveying machines: crushings jaws, impact wedges, linings, etc. | |
