AISI 1010,1.0301,DIN Ck10
- Grade:
Click To Email Seller
Share this ad
Specification, Chemical & Mechanical Performance
We can produce 1.1121, DIN Ck10, AISI 1010 stainless steel round rods, 1.1121, DIN Ck10, AISI 1010 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With Bozhong production experience, strict control 1.1121, DIN Ck10, AISI 1010 chemical composition and 1.1121, DIN Ck10, AISI 1010 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
Production specification
Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Designation by Standards
| Brand Name | LH No. | Mat. No. | DIN | EN | AISI |
| CK10 | 605 | 1.0301 | C10 | C10 | 1010 |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| 0.10 | max. 0.40 | 0.45 | - | - | - | - | - | - |
Description
CK10 is a plain carbon steel with a nominal 0.10% carbon content. It is a relatively low strength steel but it may be quenched and tempered for increased strength.
Applications
The low carbon steels, such as CK10, are used for applications such as cold headed fasteners and bolts.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.85
Soft Annealing
Heat to 800-840oC, cool slowly.
Hardening
This steel is generally used in the annealed or case hardened condition. It may be heat treated, quenched and tempered but the cost for so doing is generally not worth the result.
Tempering
Tempering temperature: 320-530oC.
Forging
Hot forming temperature: 1050-850oC.
Machinability
Machinability of CK10 steel is fairly good, especially in the cold drawn or cold worked condition. Based upon carbon steel AISI 1112 as a reference that is considered 100% machinable (easily machined) the CK10 steel has a rating of 55%.
Corrosion Resistance
This is a plain carbon steel and has no corrosion resistance. It will rust unless protected.
Welding
CK10 steel may be welded by all of the standard welding techniques.
Cold working
CK10 is easily cold worked by traditional means. Following severe cold working a stress relief, or full, anneal should be performed.
Mechanical properties
Heat treatment
